GZM-200LKAM automatic liquid filling machine, using the liquid level in the barrel under the filling method, can be suitable for 200L single barrel filling;The unique design of adjustable pneumatic ball valve and spray gun not only improves the filling speed, but also ensures the filling accuracy;And can reduce the drip of residual liquid after perfusion;The gas collecting cover can avoid the leakage of volatile gas during the filling process and effectively protect the operator.During operation, the empty barrel is placed on the conveying line of the empty barrel, and it will stop automatically when it reaches the position. The automatic counterpart device will automatically aim the empty barrel mouth just below the nozzle of the spray gun.The spray gun is automatically lowered into the mouth of the barrel, the empty barrel is automatically peeled, and then double-speed filling;At the end of filling, the spray gun is automatically lifted out of the barrel and enters the conveying line of the full barrel. At the capping position, the conveyor stops, the cap is placed manually, and the capping machine is pulled down to complete the filling.
The main features
Filling method: under the liquid level in the barrel;
Filling type: gross weight type weighing mode;
Overall structure: high quality carbon steel structure, electrostatic spraying
Piping structure: the flow element is 316 stainless steel, Teflon washer and seal ring;
Air source connectors: provide filtration, adjustment and lubrication devices (triplet);
Flow control: two-speed control, through the combination of control to control the product flow, Yi denier power off, all valves closed;
Drip-proof liquid box: stainless steel manufacturing;
Spray gun lifting control: the position of the spray gun is controlled by the proximity switch, the rising speed of the spray gun is adjustable;
Filling machine parameters
Filling capacity: 300kg/ barrel;
Filling accuracy: 0.2%;
Rated speed: 60 barrels (200L) /hr(with incoming viscosity, speed);
Weighing device: maximum weighing 300kg, indexing value D: 100g;
Foundation condition: Horizontal solid concrete floor, concrete thickness should be greater than 15cm.
Temperature range: -10 ℃ ~ +45 ℃.
Relative humidity: < 95% (no condensation).
Power source: 220V, 50Hz, 1.0KW.
Working air source: air pressure 0.5Mpa + 0.1Mpa, gas consumption: 10m3/h.
Material interface: DN50 PN1.6MPa (HG20592-97), can be provided by the user interface standards.
Material inlet pressure: (0.2~0.6) Mpa (related to material properties).
Air source interface: user provided G1/2 internal thread for quick connection.
The main features
- Can also be used where equipment difficulty is increased due to toxic gases or bubbles.
- Use environment: explosion-proof area (1 kind of environment).
- The nozzle moves up and down left and right easily
- Can display 100 kinds of setting codes (SET POINT) setting and setting values.
- Save the date and time and accumulative information in case of power failure.
- Can connect parallel port, serial port printer (option).
- High-speed, high-precision use of 3-section control valve mode.(Yi: 2-segment control)
- External contamination can be prevented with a leak preventer